Facilities
All structural tube products are manufactured to
ASTM A500, Grades B and C. Our on-time eight
week rolling cycle
assures having your structural tubing when you need it.
 Located on the southwest side of Chicago,
this 270,000 square foot facility produces square and rectangular structural tubing
to ASTM A500 Grades B&C. The
Chicago Division produces from 2" square to 6" square, wall 1/8" to 3/8". In addition,
in-house bandsaw cutting
is available, including mitre cutting.
 |
|
|
|
The following products and services are offered at our Chicago
Division:
Please check with our Sales Department for minimum order quantities
|
|
|
|
 Located on the banks of the Illinois River,
75 miles southwest of Chicago, this 380,000 square foot facility produces square
and rectangular steel tubing to ASTM
A500 Grades B&C. The Marseilles Division produces from 2-1/2" square to
10" square, wall 1/8" to 5/8". In addition, in-house
bandsaw cutting is available, including mitre cutting.
|
|
|
|
|
The following products and services are offered at our Marseilles
Division:
Please check with our Sales Department for minimum order quantities
|
|
|
|
 Located on the banks of the Tennessee River,
this 310,000 square foot facility will produce square and rectangular steel tubing
to ASTM A500 Grades B&C.
The Decatur Division will produce from 2-1/2" square to 10" square, wall
1/8" to 5/8". In addition, in-house
bandsaw cutting is available, including mitre cutting.
|
|
|
|
|
The following products and services are offered at our Decatur
Division:
Please check with our Sales Department for minimum order quantities
|
|
|
|
|
